MOT Status
ExpiredMileage
111,530 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Nearside Headlamp aim too low and too far to the left. (1.8)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake hose excessively chafed (3.6.B.4d)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
offside rear tyre has damage to sidewall
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
offside rear tyre has damage to sidewall
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Rear rear brake recording little or no effort (3.7.B.5a) DANGEROUS
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Brake pipe slightly corroded (3.6.B.2c)
front discs slightly worn
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Brake pipe slightly corroded (3.6.B.2c)
front discs slightly worn
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Body has slight corrosion (6.1.B.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear coil spring cracked (2.4.C.1a)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Body has slight corrosion (6.1.B.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
nearside obligatary mirror damaged
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear coil spring cracked (2.4.C.1a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Both front lower arm front bushes perished.
Front discs slightly worn and corroded.
Front pads 60% worn.
Nearside Front Seat belt stitching slightly frayed (5.2.2b)
Nearside wing mirror glass broken.
Offside rear coil spring slightly corroded.
Rear axle bushes slightly perished.
Slight corrosion on nearside rear sill.
Slight corrosion on offside front sill.
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV53 HTN is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BV53 HTN, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BV53 HTN?
You can check the full history of BV53 HTN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV53 HTN registered?
BV53 HTN is a 2003 Ford Ka, first registered on 10 September 2003.
Is BV53 HTN safe to buy?
The MOT history for BV53 HTN shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV53 HTN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV53 HTN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.