MOT Status
ExpiredMileage
114,251 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
parking brake effieniency only just met it would appear that the braking system requires adjustment or repair.
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
engine oil leak
fuel strap is corroded
rear number plate is faded
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit bold on the inner edge (4.1.E.1)
engine oil leak
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit bold on the inner edge (4.1.E.1)
engine oil leak
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
oil leak
Exhaust has a major leak of exhaust gases (7.1.2)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
oil leak
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Brake load sensing valve seized (3.6.E.3)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside rear tyre is cracked nearly down to the cords
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV53 JDF is a 2003 Peugeot 206 in Silver with a 1,398cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 73.7%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BV53 JDF, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BV53 JDF?
You can check the full history of BV53 JDF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV53 JDF registered?
BV53 JDF is a 2003 Peugeot 206, first registered on 1 September 2003.
Is BV53 JDF safe to buy?
The MOT history for BV53 JDF shows 19 tests with a 73.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV53 JDF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV53 JDF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.