2003 Peugeot 206

Brake pad(s) less than 1.5 mm thick O/S REAR (3.5.1g)

Emissions not tested EX BLOWING CO HIGH LAMBA HIGH (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported MOUNTINGS BROKEN (7.1.1)

Front position lamp(s) has less than 50% of the light sources illuminating O/S FRONT DIM (1.1.A.3b)

Headlamp aim beam image obviously incorrect N/S (1.8.A.1b)

Horn not working (1.6.2a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt N/S FRONT (2.4.G.2)

Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt O/S FRONT (2.4.G.2)

Suspension arm has excessive play in a pin/bush N/S REAR LOWER ARM (2.4.G.2)

Suspension arm has excessive play in a pin/bush O/S REAR LOWER ARM (2.4.G.2)

Tyre tread depth below requirements of 1.6mm N/S FRONT (4.1.E.1)

Tyre tread depth below requirements of 1.6mm O/S FRONT (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

brake disc in such a condition that it is seriously weakened FRONT O/S (3.5.1i)

front brake excessively fluctuating FRONT O/S (3.7.B.3)

rear brake recording little or no effort N/S (3.7.B.5a)

rear parking brake recording little or no effort N/S CABLE BROKEN (3.7.B.6a)

rear parking brake recording little or no effort O/S REAR (3.7.B.6a)

Tyre worn close to the legal limit N/S & O/S REAR (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

oil leak

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust system not adequately supported (7.1.1)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Rear Rear fog lamp not working (1.3.2b)

Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Nearside Rear Direction indicators adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Offside Rear Direction indicators adversely affected by the operation of another lamp (1.4.A.2h)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Headlamp aim too low (1.8)

Exhaust has part of the system slightly deteriorated (7.1.1a)