2007 Piaggio Fly

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Front position lamp missing (1.1.1a)

Front Headlamp aim too low (1.6)

Front Riders seat insecure (6.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Motorcycle structure excessively damaged (6.1.1a)

Nearside Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Nearside Rear Brake lever mounting insecure (3.1.2a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Riders seat insecure (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

seat catch broken,secured by strap

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Headlamp aim too high (1.6)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Riders seat insecure (6.2.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Front suspension has inadequate damping effect. (2.3.6c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension bearing has excessive free play (2.4.A2a(i))

Riders seat insecure (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear suspension bearing has slight free play (2.4.A2a(i))