2008 Mazda 6

Brake disc worn, pitted or scored, but not seriously weakened All brake discs (1.1.14 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Underside corroded

Emissions unable to be completed Cat not fitted (8.2.1.2 (d))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened All brake discs (1.1.14 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Underside corroded

Emission control equipment missing where fitted as standard cat missing (8.2.1.1 (a))

Emissions unable to be completed Exhaust holed and cat missing (8.2.2.2 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Horn not working (7.7 (a))

Nearside Rear Floor excessively deteriorated Holed (6.2.4 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front brake flex not mounted correctly

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

all brake discs slightly corroded

front and rear suspension arms & both subframe's coated in underseal

sections of underbody, sills and chassis coated in underseal

Emissions unable to be completed catalyst missing (8.2.1.2 (d))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Offside Front Lower Anti-roll bar ball joint excessively worn front arm (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front brake flex not mounted correctly

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

all brake discs slightly corroded

front and rear suspension arms & both subframe's coated in underseal

sections of underbody, sills and chassis coated in underseal

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Emissions not tested (8.2.1.2 (d))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Stop lamp not working (1.2.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

rear tyres worn on inner edges