MOT Status
ExpiredMileage
97,238 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Brake pipe corroded, covered in grease or other material All pipes (1.1.11 (c))
Engine MIL illuminated vehicle Pre 2003.
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Items removed from driver's view prior to test ()
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security shocker mounting. (6.2.2 (d) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced Whole car (6.1.1 (c) (i))
fuel tank strap corroded tank still secure
Offside Front Lower Ball joint has excessive play (2.2.B.1f)
Offside Side repeater not working (1.4.A.2c)
Power steering ram(s) leaking from a failed seal (2.3.3b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s/r tyre surface cracks
o/s/r plate lamp lens missing
surface scratches on front screen
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Braking system leaking (3.6.A.1)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
rear brake application uneven (3.7.B.2)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Items removed from driver's view prior to test
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Side repeater slightly discoloured (1.4.A.2f)
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s/r tyre surface cracks
o/s/r plate lamp lens missing
surface scratches on front screen
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside rear number plate light lense missing
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Rear Registration plate lamp not working (1.1.C.1d)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
front discs worn
Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Shock absorber has slight corrosion to the casing (2.7.2a)
both rear tyres cracking
coil spring corroded (2.4.C.1b)
offside front tyre cracking
rear brake hose ferrules corroded
Nearside Front Headlamp aim not tested (1.8.A.1c)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly pitted (3.5.1h)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Shock absorber has slight corrosion to the casing (2.7.2a)
both rear tyres cracking
coil spring corroded (2.4.C.1b)
offside front tyre cracking
rear brake hose ferrules corroded
MIDDLE AND REAR EXHAUST CORRODED
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
REAR WIPER WORN
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BW02 VMD is a 2002 Peugeot 206 in Blue with a 1,360cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BW02 VMD, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BW02 VMD?
You can check the full history of BW02 VMD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BW02 VMD registered?
BW02 VMD is a 2002 Peugeot 206, first registered on 31 July 2002.
Is BW02 VMD safe to buy?
The MOT history for BW02 VMD shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BW02 VMD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BW02 VMD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.