MOT Status
ExpiredMileage
128,859 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
o/s/r brake slight bind
Battery insecure (1.9.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
EML on
Nearside Front Tyre worn close to the legal limit and very worn inner edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit and very worn inner edge (4.1.E.1)
Offside Outer Vehicle structure has slight corrosion sill (6.1.B.2)
Offside Rear Nail in tyre ()
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak ()
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Brakes imbalanced across an axle (3.7.B.5b)
Horn not working (1.6.2a)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Oil leak
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Oil leak
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Vehicle structure has slight damage (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
coolant leak thermostat
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
coolant leak thermostat
Nearside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring incomplete (2.4.C.1a)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Front Road wheel bead rim badly distorted (4.2.A.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
front pads low.
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BW03 CFD is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BW03 CFD, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BW03 CFD?
You can check the full history of BW03 CFD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BW03 CFD registered?
BW03 CFD is a 2003 Ford Ka, first registered on 4 July 2003.
Is BW03 CFD safe to buy?
The MOT history for BW03 CFD shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BW03 CFD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BW03 CFD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.