2007 Peugeot 107

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting (5.3.6 (a) (i))

Offside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Wheel bearing rough when rotated play (5.1.3 (b) (i))

Driver's view to the sides outside the swept area of the windscreen wipers restricted by an obstruction sun strip (3.1 (a) (i))

Items removed from driver's view prior to test ()

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both side rear (5.1.2 (b) (i))

Rear Coil spring corroded both rear (5.3.1 (b) (i))

Rear axle corroded

Rear Coil spring corroded both rear (5.3.1 (b) (i))

Emissions unable to be completed (8.2.1.2 (d))

Rear Exhaust emissions likely to be affected by an exhaust leak rear back box joint (8.2.1.1 (b))

Rear Coil spring corroded both rear (5.3.1 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))

Rear Coil spring corroded both rear (5.3.1 (b) (i))

Emissions not tested (8.2.1.2 (d))

Rear Exhaust emissions likely to be affected by an exhaust leak rear joint (8.2.1.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))

Rear Coil spring corroded both rear (5.3.1 (b) (i))

Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

N/S/R registration bulb cover missing

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Offside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)