2003 Jaguar S-type

Front All position lamps have a product on the lenses but not adversely affecting light output BOTH SIDES (4.2.3 (b) (ii))

Front Upper Suspension arm ball joint dust cover severely deteriorated BOTH SIDES (5.3.4 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened BOTH SIDES (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin BOTH SIDES (1.1.13 (a) (ii))

UNDERSIDE OF VEHICLE HAS SURFACE RUST

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Shock absorbers has light misting of oil n/s + o/s (5.3.2 (b))

Registration plate deteriorated but not likely to be misread front and rear reg plates (0.1 (b))

evidence of oil and coolant leak seen from underside of vehicle

Front Shock absorbers has light misting of oil n/s + o/s (5.3.2 (b))

Headlamp aim too low n/s + o/s (4.1.2 (a))

Registration plate deteriorated but not likely to be misread front and rear reg plates (0.1 (b))

evidence of oil and coolant leak seen from underside of vehicle

Both rear brake discs corroded.

Rear handbrake pads low.

Tyre worn close to legal limit/worn on edge Nearside rear tyre inner edge. (5.2.3 (e))

Undertrays and sill covers removed at time of test.

Nearside Rear Play in lower suspension arm inner rear bush / joint

Nearside Rear Slight play in lower suspension arm outer bush / joint

Offside Rear Play in lower suspension arm inner rear bush / joint

Offside Rear Slight play in lower suspension arm outer bush / joint

Screen wipers slightly poor

Nearside Headlamp aim too low (1.8)

Screen wipers slightly poor

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too low (1.8)

Offside Rear Tie bar/rod ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust noisy (7.1.4)

N/S/R tyre in poor condition

Play in O/S/R lower shocker bush

Very slight play in N/S/R lower shocker bush

Both front to rear metal brake pipes corroded. Unable to fully test due to poor access

Both rear shocker lower bushes in poor condition

N/S/F wheel rim slightly out of shape

O/S/F head lamp beam pattern poor

Corrosion to rear metal brake pipes

Front brake discs worn

N/S/F wheel rim slightly out of shape

Rear parking brake pads getting low

Slight brake judder from front

Nearside Rear Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

nsf tyre has scuff mark on outer sidewall and osf tyre cracking on inner sidewall but not showing cords

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside rear tyre has cut in sidewall

Parking brake: efficiency below requirements (3.7.B.7)