2008 Ford Ka

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan to sill (7.1.1 (a) (i))

Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill, door seal area and lower sill (7.1.1 (a) (i))

Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan 3 places (7.1.1 (a) (i))

Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Items removed from driver's view prior to test ()

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor next to inner sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Items removed from driver's view prior to test ()

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Front Tyre worn close to legal limit/worn on edge Both front tyres inner edges (5.2.3 (e))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both inner sill sections corroded. (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced upper sill /lower door section corroded (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill section corroded (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Bumper sections corroded (6.1.1 (c) (i))

Front Tyre worn close to legal limit/worn on edge Both front tyres inner edges (5.2.3 (e))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both inner sill sections corroded. (6.1.1 (c) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced upper sill /lower door section corroded (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill section corroded (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Bumper sections corroded (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both front inner sill sections corroded (6.1.1 (c) (i))

Fuel tank corroded

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Wheel arch/Chassis leg section (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both rear inner sill section corroded (6.1.1 (c) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Spare tyre defective flat ()

surface corrosion

slight service rust

Front Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Registration plate lamp not working (1.1.C.1d)

front brake application uneven (3.7.B.2)

Front Inner Brake pad(s) wearing thin (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Rear Tyre has ply or cords exposed both (4.1.D.1b)

both rear tyres badly perished

rear tyres perished

rear tyres perished

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear tyres perished

Front Tyre worn close to the legal limit (4.1.E.1)

both front tyres perished

both rear tyres perished

Nearside Front Brake hose excessively damaged (3.6.B.4d)