MOT Status
ExpiredMileage
86,608 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Brake hose slightly deteriorated (1.1.12 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive sills inner sills inner arches suspension coil springs floors chassis (5.3.6 (a) (i))
Suspension component pin or bush slightly worn all deteriorating (5.3.4 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Rear Service brake effort inadequate at a wheel both (1.2.1 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sills (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Brake hose slightly deteriorated (1.1.12 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive sills inner sills inner arches suspension coil springs floors chassis (5.3.6 (a) (i))
Suspension component pin or bush slightly worn all deteriorating (5.3.4 (a) (i))
Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Brake hose slightly deteriorated (1.1.12 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear shocks weak no leaks
Suspension component mounting prescribed area is corroded but not considered excessive sills inner sills chassis inner arches suspension coil springs (5.3.6 (a) (i))
Suspension component pin or bush slightly worn all deteriorating (5.3.4 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Brake hose slightly deteriorated (1.1.12 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear shocks weak no leaks
Suspension component mounting prescribed area is corroded but not considered excessive sills inner sills chassis inner arches suspension coil springs (5.3.6 (a) (i))
Suspension component pin or bush slightly worn all deteriorating (5.3.4 (a) (i))
Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Brake hose slightly deteriorated (1.1.12 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear chassis (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive sills inner sills (5.3.6 (a) (i))
Suspension component pin or bush slightly worn deteriorating (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Service brake efficiency below requirements (1.2.2 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i))
Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Brake hose slightly deteriorated (1.1.12 (b) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear chassis (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive sills inner sills (5.3.6 (a) (i))
Suspension component pin or bush slightly worn deteriorating (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn bushes deteriorated but can still function as intended (5.1.2 (b) (i))
brake flexis deteriorating
general corrosion of floors, inner sills, and around axle
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn bushes deteriorated but can still function as intended (5.1.2 (b) (i))
brake flexis deteriorating
general corrosion of floors, inner sills, and around axle
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Suspension component mounting prescribed area is corroded but not considered excessive inner arches (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Suspension component mounting prescribed area is excessively corroded both inner sills (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Suspension component mounting prescribed area is corroded but not considered excessive inner arches (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive sills (2.4.A.3)
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Rear Tyre worn close to the legal limit (4.1.E.1)
Suspension component mounting prescribed area is corroded but not considered excessive inner sills floors chassis (2.4.A.3)
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Rear Tyre worn close to the legal limit (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Suspension component mounting prescribed area is corroded but not considered excessive inner sills floors chassis (2.4.A.3)
Brake hose slightly deteriorated all (3.6.B.4d)
Brake pipe slightly corroded all (3.6.B.2c)
Nearside Radius arm has slight play in a pin/bush (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive sills inner sills floors chassis (2.4.A.3)
Front Radius arm has slight play in a pin bearing (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Braking system leaking (3.6.A.1)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Rear Body has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Headlamp aim too high (1.8)
Front Lower Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front coil spring cracked (2.4.C.1a)
Offside Front coil spring cracked (2.4.C.1a)
Offside Stop lamp not working (1.2.1b)
O/S rear tyre 2mm
How Reliable is the Ford Fiesta?
Based on 33,753,820 MOT tests across 2,828,392 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BW51 JCO is a 2002 Ford Fiesta in Blue with a 1,242cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 60.7%.
Across all 2002 Ford Fiesta models, the average MOT pass rate is 70.8% with a typical mileage of 61,315 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Fiesta fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 959,538 recorded failures. If you're considering buying BW51 JCO, it's worth having these areas checked by a mechanic before committing.
The Ford Fiesta typically stays on UK roads for around 34 years. At 24 years old, this Ford Fiesta is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BW51 JCO?
You can check the full history of BW51 JCO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BW51 JCO registered?
BW51 JCO is a 2002 Ford Fiesta, first registered on 31 January 2002.
Is BW51 JCO safe to buy?
The MOT history for BW51 JCO shows 28 tests with a 60.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BW51 JCO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BW51 JCO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.