2004 Jaguar S-type

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component pin or bush excessively worn traction control arms (5.3.4 (a) (i))

Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component pin or bush excessively worn traction control arms (5.3.4 (a) (i))

Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Windscreen washer not working (3.5 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Upper Torque/reaction arm ball joint dust cover damaged, but preventing the ingress of dirt both rear upper CONTROL ARM BALL JOINT (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

o/s/f mirror cover missing

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both rear tyres starting to wear in middles

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too low (1.8)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

offside wiper split.

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

offside wiper split.

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)