2005 Peugeot Boxer

Coil spring corroded both side front (5.3.1 (b) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

LPG gas tank corrosion on the surface

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Lower Vehicle structure is repaired but structural rigidity is not significantly reduced near a rad suporter (6.1.1 (d) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Vehicle structure is repaired but structural rigidity is not significantly reduced osf/nsf inner sills and jack point (6.1.1 (d) (i))

Offside Front Outline marker lamp not working (4.2.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Front Outline marker lamp missing (4.2.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Coil spring corroded both side front (5.3.1 (b) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

LPG gas tank corrosion on the surface

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Lower Vehicle structure is repaired but structural rigidity is not significantly reduced near a rad suporter (6.1.1 (d) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Vehicle structure is repaired but structural rigidity is not significantly reduced osf/nsf inner sills and jack point (6.1.1 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Horn not working (7.7 (a))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Horn not working (7.7 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jack point (6.1.1 (c) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Horn not working (7.7 (a))

Nearside Rear Upper Position lamp not working (4.2.1 (a) (ii))

Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting behind drivers wheel corroded and holes next to sub frame mounting point. (6.2.2 (d) (i))

Offside Rear All direction indicators not working (4.4.1 (a) (ii))

Offside Rear Lower Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Body has slight corrosion Inner arch (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch (6.1.B.2)

Nearside Front Body has slight corrosion Inner arch (6.1.B.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear brake binding (3.7.B.1)

rear brake binding (3.7.B.1)

Both front upper marker lights not working

Front brake disc slightly pitted (3.5.1h)