2005 Sym Jet

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Plate brake test indicates a slightly grabbing brake (3.3.B1b)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front wheel bearings have excessive free play (2.3.5b)

Steering headbearing has excessive free play (2.2.2)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

slight obsure front indicators clear sellotape

Front Fairings insecure but not likely to impede the steering (2.1.2e)

front pads uneven wear

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake lever is damaged and the brake cannot be readily applied (3.1.3c)

Front Plate brake test indicates a sticking brake (3.3.B1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp insecure (1.2.3b)

Plate brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.B2b)

Rear Brake lever cannot be released smoothly (3.1.3d)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Fairings insecure but not likely to impede the steering (2.1.2e)

front pads uneven wear

no further adjustment available on rear brake adjuster

Front Tyre worn close to the legal limit (4.1.3(i))

Oil leak

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear wheel bearings have slight free play (2.4.A.2c)

o/s mirror loose

speedo cable missing

Front Direction indicator obscured (1.5.1a)

Nearside Rear Direction indicator insecure (1.5.3b)

Offside Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(i))

Oil leak

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear wheel bearings have slight free play (2.4.A.2c)

o/s mirror loose

speedo cable missing

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front suspension has inadequate damping effect. (2.3.6c)

Plate brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.B2b)

Offside Rear Direction indicator damaged and function impaired (1.5.3a)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear reflector on motorcycle missing (1.4.1)

engine running fast on tick over

no mirrors fitted

Nearside Front Front suspension has inadequate damping effect. (2.3.6c)

Nearside Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Offside Front Front suspension has inadequate damping effect. (2.3.6c)

Offside Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Offside Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Offside Rear Direction indicator incorrect colour (1.5.1b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Fairings insecure but not likely to impede the steering (2.1.2e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))