2012 Lexmoto Arrow 125

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Registration plate slightly loose (0.1 (a))

Drive chain worn to excess (6.1.7 (c) (i))

Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Indicator tell tale missing (4.9.1 (a) (i))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Drive chain slightly tight (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bush has slight free play SWING ARM BUSHES (2.4.A2a(i))

Drive chain slightly tight (6.2.1d)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bush has slight free play SWING ARM BUSHES (2.4.A2a(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake hose slightly chafed (3.2.B3a)

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake hose slightly chafed (3.2.B3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)