2013 Ford Transit

Brake pipe corroded, covered in grease or other material all undersealed (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material corroded in engine bay (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Inner Steering linkage ball joint has slight play tie rod (2.1.3 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

undersealed

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis/floor (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings/chassis (5.3.6 (a) (i))

Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive and rear chassis/floor (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings/chassis (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

exhaust corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

exhaust corroded

Central Front Lower Gearbox mounting defective

Central Front Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

exhaust back box corroded

general underbody corrosion

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Leaf spring saddle is fractured (5.3.1 (b) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Registration plate does not conform to the specified requirements both spacing (0.1 (d))

Central Front Lower Gearbox mounting defective

Central Front Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

exhaust back box corroded

general underbody corrosion

Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

chip in screen

Rear Brake pad(s) wearing thin (3.5.1g)

brake disc worn, pitted or scored, but not seriously weakened all 4 (3.5.1i)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner s/wall (4.1.D.1a)

Nearside Registration plate lamp not working 2 x bulbs (1.1.C.1d)

Centre Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)