MOT Status
ExpiredMileage
135,068 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Stop lamp has light sources not illuminating, but not more than 50% high level (1.2.1b)
Nearside Front Headlamp aim too high (1.8)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Headlamp aim too low (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Stop lamp has light sources not illuminating, but not more than 50% high level (1.2.1b)
Exhaust has a minor leak of exhaust gases deteriorated (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. slow (3.7.B.6b)
Oil leak ()
Front Brake pipe slightly corroded to rear (3.6.B.2c)
Nearside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (3.6.C.3)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
brake pipes coat in grease
coolant leak
oil leak
Nearside Headlamp aim too low (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Headlamp aim too high (1.8)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Track rod end loose (2.2.B.1d) DANGEROUS
Front Brake pipe slightly corroded to rear (3.6.B.2c)
Nearside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (3.6.C.3)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
brake pipes coat in grease
coolant leak
oil leak
Corrosion on floor pan.
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Lower Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Upper Brake pipe excessively corroded (3.6.B.2c)
Power steering component(s) leaking (2.3.3b)
Rear fog lamp not working (1.3.2b)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Corrosion on floor pan.
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Offside Front Direction indicator not working (1.4.A.2c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust system not adequately supported (7.1.1)
Nearside Registration plate lamp not working (1.1.5c)
Offside Registration plate lamp not working (1.1.5c)
Nearside Registration plate lamp not working (1.1.5c)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
front brake discs slightly worn
Nearside Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Offside Front Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.B3)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BX52 PYS is a 2002 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BX52 PYS, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BX52 PYS?
You can check the full history of BX52 PYS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BX52 PYS registered?
BX52 PYS is a 2002 Peugeot 206, first registered on 1 September 2002.
Is BX52 PYS safe to buy?
The MOT history for BX52 PYS shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BX52 PYS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BX52 PYS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.