2003 MG Zt

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Inner Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Emissions not tested (7.4.B.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

BOTH FRONT BRAKE DISCS ARE WORN

BOTH FRONT STRUTS ARE SLIGHTLY STIFF

BOTH REAR BRAKE DISCS ARE WORN

Engine covers fitted obscuring some components in the engine bay

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

HEADLAMPS WHERE SET AT ZERO..ON THE DASH

NEARSIDE AND OFFSIDE INNER AND OUTER SILLS HAVE BEEN CHECKED..APPLIED FINGER AND THUMB PRESSURE AS PER THE M.O.T MANUAL

Nearside Front Anti-roll bar linkage corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Nearside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Inner Front Drag link end ball joint has slight play (2.2.B.1f)

Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Anti-roll bar linkage corroded but not seriously weakened (2.4.G.1)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

OBJECT HANGING FROM THE CENTRE REAR VIEW MIRROR

OFFSIDE FRONT HEADLAMP AIM IS AT ITS LOWEST ACCEPITABLE LEVEL..WILL REQUIRE AJUSTEMENT.SET AT ZERO..ON THE DASH

Offside Front Anti-roll bar linkage corroded but not seriously weakened (2.4.G.1)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front coil spring corroded (2.4.C.1b)

Offside Inner Front Drag link end ball joint has slight play (2.2.B.1f)

Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Anti-roll bar linkage corroded but not seriously weakened (2.4.G.1)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

THE WHOLE UNDERSIDE OF THE VEHICLE..I.E FLOOR AREA HAS BEEN CHECKED..APPLIED FINGER AND THUMB PRESSURE AS PER THE M.O.T MANUAL..SOME PLASTIC FLOOR COVERS

Under-trays fitted obscuring some underside components

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Road wheel fractured (4.2.B.1a)

Exhaust system not adequately supported (7.1.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

handbrake travel

Offside Front Front position lamp(s) not working (1.1.A.3b)

brake disc excessively scored (3.5.1h)