2005 Honda Xr 125 L-4

Central Front Upper Headlamp aim too low (4.1.2 (a))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim so that beam "kick up" is not visible on the screen (1.6.B.1)

Nearside Front Direction indicators not working (1.5.1c)

Rear Brake locking device missing (3.2.A1e)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

horn poor

n/s/r foot rest loose

no indicators fitted at time of test

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear reflector on motorcycle missing (1.4.1)

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Fairings so located that it is likely to impede the steering (2.1.2e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has excessive free play (2.4.A2a(i))

Riders seat insecure (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

front tyre pressure incorect

number plate light not working

Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain needs lubricating and adjusting

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front brake disc has been over heated

Nearside front fork dust seal in poor condition

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp aim too high (1.6)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle obscured (1.4.1)

Both front fork dust seals in poor condition

Drive chain needs lubricating and adjusting

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front and rear tyre under inflated

Front brake disc has been over heated

Drive chain worn but not considered excessive (6.2.1e)

front forks pitted

slinght bind on front wheel