2005 Aprilia Mojito 125

Front Wheel bearing has slight play (5.1.3 (a) (i))

front brake lever bent

front tyre slightly outta shape

speedo cable broke

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Rear Tyre fouling another component Rear mudguard (5.2.3 (f))

Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Mudguard insecure ()

Front Front wheel bearings are slightly rough (2.3.5b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Front wheel bearings are slightly rough (2.3.5b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly stiff (2.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly stiff (2.2.1a)

Front Stop lamp remains on when the brake is released (1.3.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly stiff (2.2.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Tyre worn close to the legal limit (4.1.3(ii))

speedo cable snapped

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too low (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))