2005 Kia Sorento

Nearside Rear cill has corrosion but due to covers fitted unable to see

Offside Rear cill has corrosion but due to covers fitted unable to see

Nearside Rear wheel arch corroded but no sharp edges due to temporary repair

Offside Rear suspect corrosion but unable to asess due to cill covers fitted

suspect corrosion but unable to asess due to cill covers fitted

Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Sill (6.2.2 (d) (i))

Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Under door (6.2.2 (d) (i))

Offside Rear Position lamp likely to become detached lens broken. (4.2.1 (c) (ii))

Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Sill (6.2.2 (d) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Anti roll bar bush plays

break not tested pipes are corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Steering locking device missing split pin from track rod end (2.1.3 (d))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Oil leak, but not excessive Transfer box (8.4.1 (a) (i))

Front Oil leak, but not excessive Transfer box (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Oil leak, but not excessive Transfer box (8.4.1 (a) (i))

Front Oil leak, but not excessive Transfer box (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

both rear wheel arches are corroding

nearside rear anti roll bar d bush has slight play

windscreen damaged swept area

wipers are perishing

Parking brake: efficiency below requirements (3.7.C.1b)

both rear wheel arches are corroding

nearside rear anti roll bar d bush has slight play

windscreen damaged swept area

wipers are perishing

Handbrake travel

Offside front tyre is wearing inner edge

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.C.1b)

Offside front tyre is wearing inner edge

Rear exhaust rubber is missing

handbrake travel

headlamp adjuster is faulty

rear exhaust rubber mount is missing

wipers are perishing

Rear Brake pad(s) wearing thin (3.5.1g)

both front shockers poor damping

Nearside Front position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.C.1b)

rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.C.1b)

Front Brake pad(s) wearing thin (3.5.1g)