2013 Volkswagen Cc

Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Nail in tyre ()

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Nail in tyre ()

Offside Oil leak, but not excessive Of engine (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Nail in tyre ()

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Nail in tyre ()

Offside Oil leak, but not excessive Of engine (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear (5.3.4 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened nearside front (1.1.14 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened offside front (1.1.14 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement nearside front (rear) (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement offside front (rear) (5.3.4 (a) (i))

nearside rear tyre has sidewall damage not reaching ply or cord

no printout was produced due to low emissions

Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt offside front (5.3.4 (b) (ii))

Electronic power steering warning lamp indicates a system malfunction (2.6 (a))

Headlamp not working on dipped beam offside (4.1.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened nearside front (1.1.14 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened offside front (1.1.14 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement nearside front (rear) (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement offside front (rear) (5.3.4 (a) (i))

nearside rear tyre has sidewall damage not reaching ply or cord

no printout was produced due to low emissions

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure inner sidewall (4.1.D.1b)

Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

emissions too clean to test

under trays fitted obscuring view of components

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

emissions too clean to test

under trays fitted obscuring view of components