2001 Mercedes-benz C

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened covered in undersill (5.3.3 (b) (i))

Tyre worn close to legal limit/worn on edge Both front (5.2.3 (e))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point/ inner sill under sill cover (6.1.1 (c) (i))

Nearside Rear Inner Suspension arm pin or bush excessively worn back arm (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened covered in undersill (5.3.3 (b) (i))

Tyre worn close to legal limit/worn on edge Both front (5.2.3 (e))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Track rod end ball joint has slight play Both front inner rackends (2.1.3 (b) (i))

Tyre worn close to legal limit/worn on edge Both rear (5.2.3 (e))

Corrosion to underside of vehicle

Front Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre worn close to legal limit/worn on edge Both (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

general corrosion

Central Seat belt buckle missing (7.1.2 (d))

Front Anti-roll bar ball joint excessively worn and rubbers (5.3.4 (a) (i))

Headlamp aim too high (4.1.2 (a))

Offside Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Direction indicator incorrect colour both (4.4.3 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

general corrosion

Rear Tyre worn close to the legal limit both (4.1.E.1)

Nearside Steering system has slight free play detected at steering wheel (2.2.A.1b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

oil leaks

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

oil leaks

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Rear rear brake excessively fluctuating (3.7.B.3)

Parking brake lever has no reserve travel (3.1.6b)

front brake application uneven (3.7.B.2) DANGEROUS

front brakes release unevenly (3.7.B.4) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Under-trays fitted obscuring some underside components

Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Upper Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Engine covers fitted obscuring some components in the engine bay

Nearside Front wheel bearing has slight play (2.5.A.3c)

Under-trays fitted obscuring some underside components

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

covers fitted to sills / engine / underside

Centre Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Headlamp aim too low and too far to the right. (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim too low and too far to the right. (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

covers fitted to sills / engine / underside

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Side repeater incomplete (1.5.A1b)

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front coil spring incomplete (2.4.C.1a)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)