2008 Audi Q7

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Brake pipe excessively corroded brake pipe on front brake caliper heavily corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded brake pipe on front caliper heavily corroded (1.1.11 (c))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear nail in tyre

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear various parts of suspension have surface rust

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Outer Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Outer Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Rear Suspension arm has slight play in a pin/bush both sides (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension arm damaged but not seriously weakened (2.4.G.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Suspension arm damaged but not seriously weakened (2.4.G.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension arm damaged but not seriously weakened (2.4.G.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Suspension arm damaged but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Front suspension has slight play in an outer ball joint (2.5.B.2a)