2001 Fiat Ducato

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Play in steering rack inner joint(s) ()

power steering pipes corroded

Exhaust has a major leak of exhaust gases middle box (6.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Front Brake pipe excessively corroded to rear brake compensator (1.1.11 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Play in steering rack inner joint(s) ()

all exhaust rubbers perished

power steering pipes corroded

Brake pipe corroded, covered in grease or other material various brake pipes showing signs of corrosion (1.1.11 (c))

Exhaust mounting defective various rubber mounts deteriorating advise changing at earliest convienience (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced corrosion on both inner sills (6.1.1 (c) (i))

n/s rear indicator lens damaged

Horn not working (7.7 (a) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/inner wing corroded through o/s behind front wheel (6.1.1 (c) (i))

Offside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake pipe corroded, covered in grease or other material various brake pipes showing signs of corrosion (1.1.11 (c))

Exhaust mounting defective various rubber mounts deteriorating advise changing at earliest convienience (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced corrosion on both inner sills (6.1.1 (c) (i))

n/s rear indicator lens damaged

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Rear Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)

Nearside Rear exhaust mounting rubber broken

Offside Play in steering rack inner joint(s) ()

Vehicles internal headlight adjuster altered to recheck lights ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Direction indicator damaged, but still visible from a reasonable distance lens broken but repaired with correct colour repair tape advise changing at earliest convienience (1.4.A.2e)

Headlamp switch faulty main beam switch faulty (1.7.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab outer sill corroded through in places also behind fibre glass body moulding (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing corroded through in several places behind wheel (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point corroded through next to cab inner sill (6.1.B.2)

Offside Headlamp excessively damaged so that the light output is severely reduced lens broken (1.7.5a)

Offside Rear Rear position lamp(s) not working side marker light n/w (1.1.A.3b)

Rear fog lamp insecure (1.3.2a)

front brake application uneven (3.7.B.2)

Nearside Rear Direction indicator damaged, but still visible from a reasonable distance lens broken but repaired with correct colour repair tape advise changing at earliest convienience (1.4.A.2e)

Offside Headlamp damaged but light output not reduced lens cracked advise changing at earliest convienience (1.7.5a)

Offside Rear footbrake and handbrake effort only just passed test advise checking at earliest convienience

exhaust rubbers deteriorating

slight perishing on both rear tyre walls

various parts of underbody showing signs of corrosion

Brake pipe slightly corroded (3.6.B.2c)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

nearside lower mirror loose

offside front inner wing corroding

offside headlamp lens cracked

Rear fog lamp not working (1.3.2b)

Brake pipe slightly corroded (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

nearside lower mirror loose

offside front inner wing corroding

offside headlamp lens cracked

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhaust mounting rubbers deteriorating

slight damage to o/s headlight lens

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside rear brake binding (3.7.B.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear All position lamps not working (1.1.A.3b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight damage to o/s headlight lens

wiring requires clipping up at rear of vehicle

Front Brake pad(s) wearing thin (3.5.1g)