1998 Toyota Land Cruiser

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Anti-roll bar attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i))

Rear Brake pipe excessively damaged (1.1.11 (c))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (rear) (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake performance unable to be tested brake pipe leaking (1.2.1 (g))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (rear) (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen washer not working (3.5 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill inner and outer (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill inner and outer (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill inner and outer (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill inner and outer (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)

Child seat fitted not allowing full inspection of adult belt

Brake pipe slightly corroded (3.6.B.2c)

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Prop-shaft flange bolt(s) loose/missing

Rear Brake pad(s) wearing thin (3.5.1g)

Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Spare tyre defective

Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

brake disc slightly pitted (3.5.1h)

brake disc slightly pitted (3.5.1h)

Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

brake disc slightly pitted (3.5.1h)

brake disc slightly pitted (3.5.1h)

registration plate character(s) incorrectly spaced (6.3.4a)