MOT Status
ValidMileage
142,929 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Front Wheel nut(s) missing both (4.2.A.1e)
Front Windscreen wiper not operating automatically when switched on both (8.2.1b)
Headlamp switch faulty main beam (1.7.1)
Nearside Front Headlamp aim too high (1.8)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Stop lamp remains on when the brakes are released (1.2.1e)
Offside Front Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing (6.1.B.2)
Offside Front Headlamp aim too high (1.8)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Stop lamp remains on when the brakes are released (1.2.1e)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Wheel nut(s) missing both (4.2.A.1e)
Central Body has slight corrosion (6.1.B.2)
Front Body has slight corrosion (6.1.B.2)
Rear Body has slight corrosion (6.1.B.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Brake pipe fouled by moving parts (3.6.B.2a)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
corrosion around jacking mounts
Front Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
corrosion around jacking mounts
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
centre silencer has temp repair to mounting
o/s/f suspention strut, spring base very close to tyre
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
centre silencer has temp repair to mounting
o/s/f suspention strut, spring base very close to tyre
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Headlamp aim too high (1.8)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Headlamp aim too high (1.8)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
How Reliable is the BMW 635?
Based on 51,017 MOT tests across 4,019 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
C408 KEP is a 1986 BMW 635 in Silver with a 3,430cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 1986 BMW 635 models, the average MOT pass rate is 71.6% with a typical mileage of 113,396 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 635 fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 1,161 recorded failures. If you're considering buying C408 KEP, it's worth having these areas checked by a mechanic before committing.
The BMW 635 typically stays on UK roads for around 43 years. At 40 years old, this BMW 635 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of C408 KEP?
You can check the full history of C408 KEP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was C408 KEP registered?
C408 KEP is a 1986 BMW 635, first registered on 21 March 1986.
Is C408 KEP safe to buy?
The MOT history for C408 KEP shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does C408 KEP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on C408 KEP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.