1985 Ford Orion

Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Front Bumper damaged and likely to cause injury when grazed or contacted end cap missing (6.1.4 (a) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Headlamp missing (4.1.1 (a) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Brake pipe excessively corroded both front and rear of axle (1.1.11 (c))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under sill (6.2.2 (d) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Obligatory mirror missing interior (3.3 (a))

Offside Front Direction indicator light intensity significantly reduced (4.4.3 (a))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Brake pipe excessively corroded both front and rear of axle (1.1.11 (c))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under sill (6.2.2 (d) (i))

Rear Bumper damaged and likely to cause injury when grazed or contacted missing (6.1.4 (a) (i))

Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced cross member not welded correctly both sides (6.1.1 (b) (ii)) DANGEROUS

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

under side of car corroded front and rear all suspension arms and parts corroeded

Fuel system component leaking (7.2.3)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Rear Brake pipe inadequately clipped (3.6.B.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Nearside rear brake recording little or no effort (3.7.B.5a) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear position lamp(s) obscured but not more than 50% (1.1.A.3c)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)