MOT Status
ExpiredMileage
58,769 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Inner Subframe mounting prescribed area is excessively corroded Sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded Front to rear (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Brake pipe slightly corroded Front to rear (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp not working on main beam (1.7.5a)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
all repairs heavily undersealed
front and rear number plates deteriorated
n/s front and rear inner wheelarches corroded
n/s headlamp deteriorated
previous repairs to rear inner sills very heavily filled and undersealed
Battery insecure (1.9.1)
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on main beam (1.7.5a)
Offside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
front and rear number plates deteriorated
n/s front and rear inner wheelarches corroded
n/s headlamp deteriorated
previous repairs to rear inner sills very heavily filled and undersealed
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
O/S and N/S/F outer sill corroded
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
O/S and N/S/F outer sill corroded
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front brake disc slightly pitted (3.5.1h)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Front brake disc slightly pitted (3.5.1h)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
no. plates starting to stain
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1) DANGEROUS
How Reliable is the Rover 213?
Based on 8,281 MOT tests across 1,997 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
C585 EBW is a 1985 Rover 213 in Black with a 1,342cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 52%.
Across all 1985 Rover 213 models, the average MOT pass rate is 64.6% with a typical mileage of 51,304 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 213 fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 2,313 recorded failures. If you're considering buying C585 EBW, it's worth having these areas checked by a mechanic before committing.
The Rover 213 typically stays on UK roads for around 42 years. At 41 years old, this Rover 213 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of C585 EBW?
You can check the full history of C585 EBW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was C585 EBW registered?
C585 EBW is a 1985 Rover 213, first registered on 18 September 1985.
Is C585 EBW safe to buy?
The MOT history for C585 EBW shows 25 tests with a 52% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does C585 EBW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on C585 EBW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.