1985 Renault R4

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Brake performance not tested suspension corrossion (1.2.1 (g))

Front Steering component mounting prescribed area is excessively corroded crossmember x2 (2.1.2 (e) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect left hand drive lights fitted (4.1.2 (c))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced quarter / boot floor (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced axle mount (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Lower Suspension arm attachment bracket/mounting corroded and seriously weakened forward arm bush mount (5.3.3 (b) (i))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect left hand drive headlight fitted (4.1.2 (c))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced quarter / boot floor (6.1.1 (c) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced axle mount (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door shut (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Suspension component attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Offside Rear Suspension component attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake hose slightly deteriorated all (1.1.12 (b) (ii))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Exhaust mounting defective x2 (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside reverse light not working

both washer aims poor

slight smearing to wipers

unable to see front brake pads

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Track rod end ball joint dust cover missing (2.1.3 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Flooring / seal (6.1.1 (c) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Flooring / seal (6.1.1 (c) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Body has slight corrosion (6.1.B.2)

Fuel Pipe/s corroded ()

Nearside Front Body has slight corrosion (6.1.B.2)

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt all 4 (2.2.C.1c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Exhaust system not adequately supported (7.1.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

slight corrosion of n/s ando/s chassis members

slight corrosion of under body variouse parts panels

n/s o/s tyres side walls perished

slight corrosion of underbody variouse parts and panals

spare tyre flate

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

n/s o/s tyres side walls perished

slight corrosion of underbody variouse parts and panals

spare tyre flate

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

N/s/f floor area is excessively corroded

slight corrosion to floor pans front and rear

tape on o s f wing

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)