MOT Status
ValidMileage
71,283 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
All suspension components corroded front and rear.
Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
All suspension components corroded front and rear.
Offside Rear inner sill corroded.
Suspension component mounting prescribed area is corroded but not considered excessive both front and rear chassis and floor areas corroded (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both front and rear inner sills corroded (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both front and rear chassis and floor areas corroded (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both front and rear inner sill areas corroded (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis and floor areas corroded (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sill areas corroded (5.3.6 (a) (i))
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear outer sill areas (7.1.1 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear outer sill areas (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis areas (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sill areas (5.3.6 (a) (i))
front and rear suspension and steering all corroding almost to excess at parts
surface corrosion to underside of vehicle
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Front to rear brake pipes corroded, shroud not allowing thorough inspection.
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside wiper blade torn
Rear coil spring corroded (2.4.C.1b)
Under-trays fitted obscuring some underside components
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
nearside and offside front track rod end dust covers slightly insecure
oil [2 litres] topped up before test
Offside Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
Inner Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tie bar/rod has excessive play in a pin/bearing (2.4.G.2)
Offside Front Tie bar/rod insecure (2.4.G.1)
rear brake application uneven (3.7.B.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Front front brake juddering slightly (3.7.A.2b)
Inner Front Brake pipe slightly corroded (3.6.B.2c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
all discs show signs of corrosion
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear brake disc excessively pitted (3.5.1h)
Both front discs and pads are looking very worn and corroded.
Both front wipers could be better.
Centre Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
O/S rear (front to rear) brake pipe is very rusty in places.
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear brake disc slightly pitted (3.5.1h)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Honda S2000?
Based on 158,239 MOT tests across 9,783 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
C7 BLE is a 2001 Honda S2000 in Red with a 1,997cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 79.2%.
Across all 2001 Honda S2000 models, the average MOT pass rate is 77.9% with a typical mileage of 71,236 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Honda S2000 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 6,528 recorded failures. If you're considering buying C7 BLE, it's worth having these areas checked by a mechanic before committing.
The Honda S2000 typically stays on UK roads for around 27 years. At 25 years old, this Honda S2000 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of C7 BLE?
You can check the full history of C7 BLE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was C7 BLE registered?
C7 BLE is a 2001 Honda S2000, first registered on 24 April 2001.
Is C7 BLE safe to buy?
The MOT history for C7 BLE shows 24 tests with a 79.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does C7 BLE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on C7 BLE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.