1985 Ford Capri

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Rear Oil leak, but not excessive diff (8.4.1 (a) (i))

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Central Electrical wiring likely to touch hot or rotating parts reverse switch melted to exhaust (4.11 (a) (iii)) DANGEROUS

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Rear Oil leak, but not excessive diff (8.4.1 (a) (i))

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Fuel pipe insecure (6.1.3 (a) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS

Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Seat belt anchorage prescribed area is inadequately repaired Chassis (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))

Nearside Inner Seat belt anchorage prescribed area is inadequately repaired Sill corroded (7.1.1 (a) (i))

Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired Sill (7.1.1 (a) (i))

Offside Front Body panel insecure Wing (6.2.1 (a) (i))

Offside Front Seat belt anchorage prescribed area is inadequately repaired Floor (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area is inadequately repaired Sill (7.1.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

nearside & offside floor to sill rail corroded

nearside chassis corroded and holed

weakness in both outer sills