1986 Renault R5

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Nearside Front Tyre has ply or cords exposed 145/70x13T (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed 145/70x13T (5.2.3 (d) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Horn not working (7.7 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis rail not within a prescribed area (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail adjacent to top shock absorber mount (5.3.6 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis rail not within a prescribed area (6.1.1 (c) (i))

Nearside Front Outer Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Brake hose excessively twisted (1.1.12 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis adjacent to shock absorber mounting (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Outer Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake hose slightly twisted (1.1.12 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake hose slightly twisted (1.1.12 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Horn sound not in accordance with requirements harsh or grating. (7.7 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))

Front Brakes imbalanced across an axle 30% o/s slow (1.2.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked on chassis (5.3.6 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure marked (5.2.3 (d) (i))

Offside Rear chassis corroded but not a prescribed area

Registration plate lamp inoperative in the case of multiple lamps or light sources x2 (4.7.1 (b) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced body sill (6.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill within 30cms of suspension mouting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill structure area within 30 cms of suspension mounting (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill within 30cms of suspension mouting (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Horn not a continuous or uniform sound (7.7 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle and shock mount (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Rear Vehicle structure has slight damage (6.1.A.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded jacking point marked (2.4.A.3)

Offside Front Brake pipe kinked (3.6.B.2b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle and shock mount (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Rear Vehicle structure has slight damage (6.1.A.1)

Exhaust has a major leak of exhaust gases middle section (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded jacking point marked (2.4.A.3)

Nearside Front Brake hose bulging under pressure (3.6.B.3) DANGEROUS

Nearside Rear Brake hose bulging under pressure (3.6.B.3) DANGEROUS

Offside Front Brake hose bulging under pressure (3.6.B.3) DANGEROUS

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 22% (3.7.B.5b)

Nearside Front tyre is badly perished

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle and shock mount (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

o/s and n/s front tyres slight cracks in tread pattern

Nearside Front Steering rack gaiter split (2.2.D.2d)

Offside Rear Subframe mounting prescribed area is excessively corroded marked (2.4.A.3)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Outer Front constant velocity joint is slightly worn (2.5.C.1b)

o/s and n/s front tyres slight cracks in tread pattern

Driver's seat insecure (6.2.A.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Registration plate lamp not working (1.1.C.1d)

Passenger's seat insecure (6.2.A.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Centre Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Nearside Front Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Nearside Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Nearside Rear Brake pipe excessively corroded to front (3.6.B.2c) DANGEROUS

Offside Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Offside Rear Brake pipe excessively corroded to front (3.6.B.2c) DANGEROUS

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake hose slightly deteriorated (3.6.B.4d)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside front tyre perished

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

windscreen cracked

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Mechanical brake component locking device missing (3.5.1l)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring broken (2.4.C.1a)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Oil leak

Spare tyre defective

nearside door mirror slightly insecure

offside front outer sill has a hole, but outside area

windscreen has a crack

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Side repeater has less than 50% of the light sources illuminating (1.4.A.2c)

Parking brake lever has no reserve travel (3.1.6b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front brake caliper has restricted free movement (3.5.1k)

Service brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear brake pipes some corrossion noted

Tyre n/s/r wearing on inner edge

Front registration plate deteriorated (6.3.1d)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear brake pipes some corrossion noted

Tyre n/s/r wearing on inner edge

BOTH REAR BRAKE BACK PLATES SHOW SOME SURFACE CORROSION,

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)