1986 BMW 628

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill area (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Nail in tyre ()

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of os outer sill (5.3.6 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

dashboard brake light coming on intermittently

rear of os inner sill starting to corrode

Fuel Pipe/s corroded ()

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside offside front bump stops deteriorating

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

windscreen washers weak

Nearside Front Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Fuel Pipe/s corroded ()

Nearside Inner Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Outer sill corroding

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Battery insecure (1.9.1)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Fuel Pipe/s corroded ()

Nearside Inner Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Outer sill corroding

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)

Nearside Front Lower Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

nail in o/s rear tyre

Brake pedal has slight creep

Offside front tyre starting to crack

Offside Drag link end ball joint has excessive play (2.2.B.1f)

Brake pedal has slight creep

Offside front tyre starting to crack

Tyres starting to crack in tread

Brake pedal creeps down when held under pressure (3.3.B.1a)

Offside Rear Suspension arm attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Tyres starting to crack in tread

Offside Front Brake pipe slightly corroded (3.6.B.2c)

rear subframe bushs starting to perish

Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)

Nearside Rear Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Battery insecure

Nearside Inner Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Track rod end ball joint has slight play (2.2.B.1f)

both front tyre tread deterioration noted

Nearside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)