1986 BMW 635

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

underbody heavily undersealed

Nearside Front Inner Steering linkage ball joint has slight play (2.1.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Steering linkage ball joint has slight play (2.1.3 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Underside Corroded/Heavily Undersealed

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Inner Steering linkage ball joint has slight play (2.1.3 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Steering linkage ball joint has slight play (2.1.3 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

underside corroded/ heavily undersealed

under body corroded

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases back box (7.1.2)

all under vehicle been shultz

Offside Rear Stop lamp not working (1.2.1b)

Rear Exhaust has a minor leak of exhaust gases back box (7.1.2)

all under vehicle been shultz

Front Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Offside Front Vehicle structure has slight corrosion sill (6.1.A.1)

Offside Front tyre cracking between tread

Offside Rear tyre cracking between tread

Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nail in nearside rear tyre

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Fuel pipe leaking (7.2.3) DANGEROUS

Nail in nearside rear tyre

Front Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Brake hose modified but not seriously weakened (3.6.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering (6.1.A.1)