2002 Peugeot 206

Front Drive shaft joint constant velocity boot severely deteriorated both (6.1.7 (g) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides back bushes (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear bump stops missing

Front Drive shaft joint constant velocity boot severely deteriorated both sides (6.1.7 (g) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Headlamp aim projected beam image is obviously incorrect both and head light lens det (4.1.2 (c))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

engine oil leak

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear axle corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Direction indicator incorrect colour (4.4.3 (a))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material to comp valve (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear axle corroded

engine oil leak

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust has a minor leak of exhaust gases middle to rear joint (6.1.2 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak ()

Nearside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Oil leak ()

Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake valve corroded but not excessively weakened (3.6.A.2b)

oil leak

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake valve corroded but not excessively weakened (3.6.A.2b)

oil leak

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Indicator switch faulty (1.4.A.1)

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Brake load sensing valve linkage stiff (3.6.E.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Oil leak

dent in o/s front wing

Fuel tank insecure (7.2.1)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Front position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Oil leak

Rear Brake load sensing valve seized (3.6.E.3)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

dent in o/s front wing

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s front wing damaged

Front Brake pad(s) wearing thin (3.5.1g)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

o/s front wing damaged

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

dent in o/s front wing

rear tyre sidewalls cracking

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Exhaust system not adequately supported (7.1.1)

dent in o/s front wing

rear tyre sidewalls cracking

Nearside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)