2003 Mazda MX-5

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill end. (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. (6.2.2 (d) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened front (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear inner sills slightly corroded

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))

Coil spring corroded N/S/R and O/S/R (5.3.1 (b) (i))

Corrosion on front and rear suspension

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

N/S/F tyre badly perished

Wiper blade insecure

corrosion on N/S and O/S Sills

both rear coilsprings are corroding

engine has a oil leak

front and rear suspension is corroding

hand brake warning light stays on

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

both rear coilsprings are corroding

engine has a oil leak

front and rear suspension is corroding

rear brake discs have slight corrosion

brake disc worn, pitted or scored, but not seriously weakened all four (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

underbody corrosion

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Parking brake lever has little reserve travel (3.1.6b)

underbody corrosion

Nearside Front coil spring broken (2.4.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

handbrake high

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)