2003 Ford Focus

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Driver's door cannot be opened from outside the vehicle (6.2.B.1b)

Front registration plate deteriorated (6.3.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Offside Rear passenger door does not latch securely closed (6.2.B.1a)

Non obligatory mirror damaged ()

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Both number plates are delaminating

Both rear anti roll bar drop links have play to the limit

Centre corrosion on the body and underside in various places

Front to rear brake pipes are corroding

The o/s front tyre is wearing on the inner shoulder

The rear exhaust hanging bracket is broken

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body sill (6.1.B.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Seat belt anchorage prescribed area is excessively corroded body sill (5.2.6)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Brake pipe slightly corroded front to rear at rear (3.6.B.2c)

Nearside Front void of tread inner edge

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

general corrotion underside

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Play in steering rack inner joint(s)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

rear exhaust hanger broken

Centre Brake pipe excessively corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

the n/s front brake is binding slightly

the n/s rear tyre is perishing

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front bumper lower spoiler damaged, insecure

nsr roll bar link rod slite play in bushes

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)