MOT Status
ExpiredMileage
78,759 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake hose excessively chafed (3.6.B.4d)
Registration plate lamp not working (1.1.C.1d)
Seat belt anchorage prescribed area is excessively corroded nearside and offside sills (5.2.6)
Seat belt anchorage prescribed area is excessively corroded nearside floor to sill (5.2.6)
Steering column flexible coupling has excessive play (2.1.5)
Suspension arm rubber bush deteriorated resulting in excessive movement nearside lower arm (2.4.G.2)
Suspension component mounting prescribed area is excessively corroded nearside and offside panels behind rear wheels (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded nearside rear chassis (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded nearside rear inner sill (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded offside A pillar (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded offside front chassis (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded offside rear chassis (2.4.A.3)
Suspension component mounting prescribed area is excessively corroded offside rear inner sills (2.4.A.3)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Suspension arm rubber bush deteriorated but not resulting in excessive movement nearside and offside rear axle bushes (2.4.G.2)
underbody corrosion
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
N/S/F spring is incorrectly located on the shock absorber seat.
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Various patches of corrosion on underbody and sills
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim too high (1.8)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Nearside Front coil spring fractured (2.4.C.1a) DANGEROUS
Various patches of corrosion on underbody and sills
Brake master cylinder fluid level below minimum level (3.6.G.1e)
Brake pedal has insufficient reserve movement (3.3.A.5)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Front Lower Bonded suspension unit attachment corroded but not seriously weakened (2.4.F.1c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Headlamp aim too low (1.8)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CA03 OMD is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CA03 OMD, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CA03 OMD?
You can check the full history of CA03 OMD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CA03 OMD registered?
CA03 OMD is a 2003 Ford Ka, first registered on 16 July 2003.
Is CA03 OMD safe to buy?
The MOT history for CA03 OMD shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CA03 OMD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CA03 OMD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.