2004 Ford Transit

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front chassis inside engine bay corroded

body corroded but still secure

centre cross member slightly corroded

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front chassis inside engine bay corroded

Offside Headlamp aim too high (4.1.2 (a))

body corroded but still secure

centre cross member slightly corroded

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal (5.3.6 (a) (i))

Nearside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal (5.3.6 (a) (i))

Offside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Fuel tank so insecure there is a risk of fire (6.1.3 (a) (ii)) DANGEROUS

Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i))

Nearside Front Inner wheel arch distorted

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Inner wheel arch distorted

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

all round body has slight distortion

Nearside Front Suspension component mounting prescribed area is distorted but not considered excessive inner wheel arch (2.4.A.3)

Nearside Upper Suspension component mounting prescribed area is distorted but not considered excessive wheel arch (2.4.A.3)

Offside Front Suspension component mounting prescribed area is distorted but not considered excessive inner wheel arch (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is distorted but not considered excessive wheel arch (2.4.A.3)

body all round distored

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension component mounting prescribed area is distorted but not considered excessive inner wheel arch (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Upper Suspension component mounting prescribed area is distorted but not considered excessive wheel arch (2.4.A.3)

Offside Front Suspension component mounting prescribed area is distorted but not considered excessive inner wheel arch (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is distorted but not considered excessive wheel arch (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

body all round distored

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded step (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Body has slight corrosion (6.1.B.2)

Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

off side front slight body damage

rear brake back plates showing signs of dampness

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp aim too low and too far to the left. (1.8)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp aim too low (1.8)

Nearside Outer Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Seat belt damaged but webbing not significantly weakened (5.2.2a)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp aim too high (1.8)