MOT Status
ValidMileage
99,936 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength O/s and n/s rear floor to sill (5.3.6 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Underside of vehicle treated with underseal
Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Tyre worn close to legal limit/worn on edge both rear (5.2.3 (e))
Nearside Front Seat belt buckle not functioning as intended Does not release under load. (7.1.2 (d))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill. (5.3.6 (a) (i))
Offside Front Seat belt buckle not functioning as intended Does not release under load. (7.1.2 (d))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill. (5.3.6 (a) (i))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Items removed from driver's view prior to test ()
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Tyre slightly damaged/cracking or perishing Sidewall damage plus 2xcuts no cord visible. (5.2.3 (d) (ii))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Inner bush front arm (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Inner bush front arm (5.3.4 (a) (i))
Rear Subframe and all suspension components very rusty
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Inner bush front arm (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Inner bush front arm (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Subframe and all suspension components very rusty
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension arm corroded but not seriously weakened all rear arms (2.4.G.1)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Parking brake lever has no reserve travel (3.1.6b)
Rear Suspension arm corroded but not seriously weakened all rear arms (2.4.G.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has no reserve travel (3.1.6b)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front coil spring broken (2.4.C.1a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Braking system leaking (3.6.A.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CA06 BFP is a 2006 Mazda MX-5 in Blue with a 1,999cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 2006 Mazda MX-5 models, the average MOT pass rate is 77.9% with a typical mileage of 54,492 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying CA06 BFP, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 20 years old, this Mazda MX-5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CA06 BFP?
You can check the full history of CA06 BFP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CA06 BFP registered?
CA06 BFP is a 2006 Mazda MX-5, first registered on 10 June 2006.
Is CA06 BFP safe to buy?
The MOT history for CA06 BFP shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CA06 BFP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CA06 BFP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.