2006 Ford Ka

Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Headlamp lens seriously defective cloudy (4.1.1 (b) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch behind plastic liner (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rails (6.1.1 (c) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rails (6.1.1 (c) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting point (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor near seat mount (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor near seat mount (7.1.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn wishbone (5.3.4 (a) (i))

Coolant leak ()

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to the legal limit tyre worn on outer edge (4.1.E.1)

advise both front chassis legs corroded

advise o/s/r tyre perishing

advise n/s/r tyre wearing unevenly

advise o/s/f tyre close to limit

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside front brake binding (3.7.B.1)

Oil leak

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

EML on

Oil leak