2006 Ford Focus

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Exhaust system insecure (6.1.2 (a))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Offside O/S Door Mirror Casing Damaged But Working Ok.

Rear Reverse Light Inop.

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension arm pin or bush likely to become detached Front Bush Detached From Arm. (5.3.4 (a) (ii)) DANGEROUS

Central Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre obviously under inflated (5.2.3 (l))

Nearside Front Tyre slightly damaged (5.2.3 (d) (ii))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Offside O/S Door Mirror Casing Damaged But Working Ok.

Rear Reverse Light Inop.

3 Of 5 Mounting Points Broken On Exhaust Heat shield (Near Fuel Tank)

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

rear exhaust hanger broken

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

rear exhaust hanger broken

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)

Rear Exhaust system not adequately supported braket (7.1.1)

Nearside Front tyre 2mm

Direction indicator incorrect colour (1.4.A.2f)

Front front brake application uneven (3.7.B.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)