2006 Ford Focus

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill. (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill. (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced Sill. (6.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened All 4discs rusty. (1.1.14 (a) (ii))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill. (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill. (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Nearside Front Body has a sharp edge caused by corrosion wing (6.1.C.1)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)

Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Vehicle's internal headlight adjuster altered to recheck lights

nearside rear tyre is worn on the inner edge.

Vehicle's internal headlight adjuster altered to recheck lights

nearside rear tyre is worn on the inner edge.

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

nearside rear tyre as 2mm on the inner, but 5mm in the middle.

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

nearside rear tyre as 2mm on the inner, but 5mm in the middle.

Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Headlamp aim too low (1.8)

Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

nearsiode rear tyre wearing uneven slightly

Front Brake pad(s) wearing thin (3.5.1g)