2006 Ford Focus

oil leak from gearbox

bottom corners of both front wings corroded

parking brake readings low but both wheels locked out

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

bottom corners of both front wings corroded

oil leak from gearbox

parking brake readings low but both wheels locked out

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

heat shields insecure

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside wing mirror cover missing

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arm bushes (5.3.4 (a) (i))

gearbox oil leak

parking brake only just met minimum requirements

Exhaust system insecure rear mount broken (6.1.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Anti-roll bar linkage ball joint excessively worn both (5.3.4 (a) (i))

Rear Brake hose excessively damaged both splitting (1.1.12 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside wing mirror cover missing

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arm bushes (5.3.4 (a) (i))

gearbox oil leak

parking brake only just met minimum requirements

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

parking brake readings low but both wheels locked

Bonnet retaining device excessively deteriorated unable to open to carry out under bonnet checks (8.4.2)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

parking brake readings low but both wheels locked

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' bottom of screen (8.3.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure out of shape (4.1.D.1b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Upper Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' bottom of screen (8.3.1a)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)