MOT Status
ExpiredMileage
36,313 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal has insufficient reserve travel (1.1.2 (a))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch fuel filler area (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength fuel filler/ inner and outer (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch/chassis (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Large rear bush extremely poor condition,strongly advise. (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Large rear bush extremely poor condition,strongly advise. (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill holed. (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush excessively worn Large rear bush separated in arm. (5.3.4 (a) (i))
Nearside Rear Body panel corroded and likely to cause injury By filler holed by corrosion. (6.2.1 (a) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch by axle mounting point. (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill holed by axle mounting. (5.3.6 (a) (i))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Floor holed by corrosion. (7.1.1 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill holed by front arm mounting. (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill holed by axle mounting. (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill holed by axle mounting. (5.3.6 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Large rear bush extremely poor condition,strongly advise. (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By jacking point (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor by sub frame (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Nearside Rear Wing badly corroded by fuel filler neck
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Front wipers slightly deteriorated.
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Nail in tyre ()
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)
Offside Front coil spring broken (2.4.C.1a)
Nearside Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)
Offside Rear puncture
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Offside Rear puncture
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Advise replacement of front brake discs
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
CA06 YWR is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying CA06 YWR, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of CA06 YWR?
You can check the full history of CA06 YWR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was CA06 YWR registered?
CA06 YWR is a 2006 Ford Ka, first registered on 30 June 2006.
Is CA06 YWR safe to buy?
The MOT history for CA06 YWR shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does CA06 YWR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on CA06 YWR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.