2007 Ford S-max

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Seat belt pretensioner missing where fitted as original equipment (7.1.4 (a))

Offside Front Drive shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Central Rear Stop lamp(s) insecure (4.3.1 (c) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm mount (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Nail in tyre ()

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm mount (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Nail in tyre ()

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm inner edge and outer edge worn (5.2.3 (e)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Coolant leak

Engine covers fitted obscuring some components in the engine bay

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rearmost seats folded flat at the time of test, with items on top of.

Under-trays fitted obscuring some underside components

Rear Brake pad(s) wearing thin (3.5.1g)

Unable to test rear seat belts due to seats folded down