2007 Yamaha Ybr 125

Front Brake fluid reservoir fluid level low very low (3.2.B1d)

Front Steering movement slightly 'notchy' (2.2.1b)

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Front front brake slightly sticking

Rear Rear wheel bearings have slight free play slight play in bearings (2.4.A.2c)

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Rear Rear suspension component cracked (2.4.A.1a)

Offside Rear Brake locking device missing torque arm spilt pin missing (3.2.A1e)

Rear wheel bearings have excessive free play (2.4.A.2c)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear wheel spindle loose (2.4.A.2b)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Exhaust noisy (7.1.2)

Steering movement slightly 'notchy' (2.2.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Clutch lever bent (6.2.1g)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Clutch lever bent (6.2.1g)

Headlamp aim too high (1.6)

Clutch lever bent (6.2.1g)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Clutch lever bent (6.2.1g)

Drive chain slightly loose (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)