2008 Yamaha Yzf R125

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Upper Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Stop lamp switch with a delay in operation Does not work (4.3.2 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Upper Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Position lamp not working (4.2.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Clutch lever pivot worn

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Clutch lever pivot worn

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bearing has slight free play (2.4.A2a(i))

slight free play in cush drive bearing

Drive chain excessively loose (6.2.1d)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bearing has slight free play (2.4.A2a(i))

Brake pad(s) contaminated by oil or grease (3.2.A1k)

Nearside Front Direction indicator insecure (1.5.3b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Footrest insecure (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering headbearing has excessive free play (2.2.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Steering headbearing has excessive free play (2.2.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear pads on 1mm

Steering headbearing has slight free play (2.2.2)

Headlamp aim too low (1.6)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear pads on 1mm

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has slight free play (2.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has slight free play (2.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))