2008 Mazda 6

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill areas (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened strong advise (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened strong advise (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes bond failing (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis areas (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill areas (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened strong advise (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened strong advise (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes bond failing (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis areas (5.3.6 (a) (i))

Emissions not tested exhaust blowing (8.2.1.2 (d))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush,mounting bolts heavily corroded (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Exhaust has a major leak of exhaust gases box blowing. all exhaust flanges HEAVILY corroded (6.1.2 (a))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm bush,mounting bolts heavily corroded (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Sub-frame corroded and seriously weakened nearside and offside front mounting point areas holed and subframe heavily corroded (5.3.3 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Suspension arm corroded but not seriously weakened All arms and securing bolts heavily corroded (5.3.3 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources reg plate bulb not working (4.7.1 (b) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)